This electrical power unit capabilities a long lasting magnet motor which has a power up gravity down circuit. Activate the begin solenoid to start out the motor to lift the machine. The lowing motion is activated through the solenoid valve with the lowering pace managed by the stress compensated flow management valve. Merchandise of this series may be extensively used in the market of logistic units such as fork lift, mini lift table, etc.
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned prior to set up of the power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which must also be clean and free of charge of impurities. N46 hydraulic oil is encouraged.
4. This energy unit is intended to be mounted vertically.
five. Check the oil level while in the tank following the first star on the electrical power unit.
six. Oil modifying is required right after the initial 100 operation hrs,afterwards as soon as each and every 3000 hours.
seven. More pump sizes and tank sizes are avaiable on request.