Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is designed to operate materials handling tools. The reducing movement is achived by the solenoid valve with all the lowering pace controlled by an adjustable needle valve. The left and appropriate functions are outfitted using a dual pilot operated test valve and cross-over relief valves.
Remark: Please consult our income engineer for your different pump displacement, motor energy or tank capacity.
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean all of the hydraulic elements concerned prior to set up of the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities.N46 hydraulic oil is suggested.
four. This electrical power unit must be mounted horizontal.
5. Check the oil level in the tank after the first get started of the power unit.
6. Oil transforming is needed following the initial 100 operation hrs, afterwards when every 3000 hrs.