Any injury about the teeth surfaces of the sprocket diminishes the life with the conveyor chain.
With typical sprockets, significantly worn sprocket teeth were repaired by teeth padding or even the entire sprocket was replaced. In either situation, restore was expensive and with teeth padding, accuracy was impaired. We produced new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our shoppers for that dramatic financial savings in value and time.
Framework
The teeth could be replaced by two procedures: individual tooth replacement or sectional teeth replacement.
The bolts and nuts utilised for mounting the teeth on for the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated around the correct.
The above photograph along with the top proper illustration demonstrate a sprocket for individual tooth substitute. Since the joint face concerning the replaced teeth and the sprocket is formed in a unique arc, the bonding accuracy is high plus the sprocket power is enhanced. On top of that, since the load acting about the mounting bolts is decreased, there exists significantly less possibility of loosening. This sprocket construction is patented.
There are actually two varieties of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are applied for massive sprockets receiving hefty loads and welded sheet steel hubs for other applications.