O-Ring Chain (LD)/X-Ring Chain (LX)

Highest wear resistance readily available by sealing grease in between pins and bushings
The sturdiness of chain is significantly improved given that grease is sealed in between the pins and bushings by O-rings. The O-ring chain could be the most dependable model of your Greatest Existence Chain Series with its superb dress in resistance even inside the circumstances or environments in which chain servicing is challenging.
Advised uses.
?Conditions in which regular chain replacement is required due to put on stretch
?Circumstances where lubrication through the services is not possible
?In an atmosphere with considerably soil, sand, dust, and so on.
?Applications that require strength increased than that of a sintered bushing roller chain
Other options
?Reducing noise. (The noise level is three dB decrease in contrast to standard roller chains.)
?Decreasing vibration with the friction made by O-Ring. (The power loss as a result of friction is almost negligible, since the frictional force concerning the pins and bushings is for normally from the applications.)
Collection of chains
The power of an O-ring chain is nearly the identical as that of a normal roller chain. (Since the pins are longer than these of regular roller chain, the typical rupture power is somewhat reduced.)
For selecting a suitable chain, refer to “Selection of Chains” .
When the support ambient temperature is larger than 80° C, specific heat resistant O-rings needs to be utilised. In this instance, get hold of us for more data.
Connecting back links and offset backlinks
Two kinds of connecting back links are available: clearance fit and interference match. When higher power or durability is needed, use interference-fit connecting link. Only 2POJ is accessible since the offset hyperlink for all sizes.
Sprockets
O-ring chain employs longer pins than a conventional roller chain. When making use of multiplex O-ring chain, the typical sprocket for multiplex chains cannot be used.
Caution
O-ring chain is not suggested in applications in which solvents or other substances may perhaps attack “Nitric Rubber”. Special material O-rings can also be offered for these conditions: Please consult us for information. In general, “Nitric Rubber” is damaged by make contact with with the following chemical products.